Flexible PVC Low Profile Edging Roll 3/8 Inch x 2 Inch x 33 Ft. Pack of 2
Be the first to review this product
$363.47/pack
Save 14%
$64.79/sqft
Reg: $427.61/pack
Handling Time Estimate: 3-5 Working Days
- Low profile edging for Heronair and Heronrib Matting
- Available in black or grey
- Each roll is 33 ft x 2-1/2 inch
- See More Details
- Low profile edging for Heronair and Heronrib Matting
- Available in black or grey
- Each roll is 33 ft x 2-1/2 inch
- Attach borders using PVC cold weld paste
- Sold in a pack of 2
- Acclimate for up to 24 hours before installing borders
- Provides ramped edge for finished look
- Follow installation instructions carefully
PVC Edging for Heronair and Heronrib Matting
NOTE: This item is a custom order and is not returnable.
Flexible PVC Low Profile Edging Roll 3/8 Inch x 2 Inch x 33 Ft. (10 mm x 50 mm x 10.1 m) provides a finished, ramped edge for your Heronair or Heronrib industrial matting installation.
Includes 2 rolls per pack, available in Black or Dark Grey.
Flexible PVC Edging requires PVC Cold Weld Paste (Type C) when covering large areas. One tube per 33 feet of edging is recommended.
Includes 2 rolls per pack, available in Black or Dark Grey.
Flexible PVC Edging requires PVC Cold Weld Paste (Type C) when covering large areas. One tube per 33 feet of edging is recommended.
Installation of PVC Edging
Lay the matting and edging in a clean dry area to acclimate and relax. This may take up to 24 hours. In a cold environment, use a heat gun and weights to help relax the matting and PVC edging.
If necessary, measure the length or width of the mat that you need. Cut using a sharp utility knife and a straight edge.
Measure the PVC edging to fit around the mat. The mat needs to sit flush with the edge of the mat. To make the corner, miter the PVC edges at a 45-degree angle. Use a straight edge and a sharp utility knife to the cut.
Apply cold weld paste to the mitered edge. Apply mesh tape to the corner and add weights for 30 minutes until dry. Repeat for each corner.
Apply cold weld paste to the PVC edging to connect the edging to the matting. The base bar should sit flush to the edge. Apply weights and allow to dry for 30 minutes. Repeat on each edge.
Carefully bend back the edging and fill the gaps with cold weld paste. Leave to completely dry for 24 hours.
Shipping
Ships via ground, larger orders may ship via freight.
This Product Ships UPS Ground and/or Freight.
Please review our shipping disclaimer.
| SKU# | EDGE/LPG-LPB |
| In Stock | Yes |
| Product Type | Roll |
| Material Type | PVC Plastic |
| Product Edging | Straight |
| Thickness | 3/8 inch |
| Width | 0.17 feet |
| Length | 33.00 feet |
| SF per Item | 5.61 |
| Weight | 33.00 lbs |
| Packaging | Cartons |
| Number of Pieces per Package Type | 2 |
| Non Absorbent | Yes |
| Special Adhesives | Yes |
| Interlock Loss | 0.00 feet |
| Interlocking Connections | No |
| Made In | UK |
| Surface Finish | Ribbed |
| Installation Method | Cold weld paste (Type C) |
| UV Treated | No |
| Reversible | No |
| Border Strips Included | No |
View Installation InstructionsRELATED PRODUCTS
(1)
