Wall Pad Installation Instructions - Greatmats LipTB Safety Wall Padding
Date Published: 10-31 - 2024
How to Install Greatmats LipTB Safety Wall Padding
For an installation beginning in a corner of a room, place a mark on the wall at the top of where the panel will be mounted. ASTM recommends mounting the panel at least 4 inches above the finished floor.
Mount the provided trim piece to the wall roughly half way up the measured panel height. This non-weight bearing trim will alleviate wrinkling and enhance the overall appearance of your mats.
Pre-drill holes in all 4 anchor mounts in the panel before mounting.
Use Hillman 1 1/2" Wall Anchors
Align the panel on the wall using the top and side marks as a guide. Mount the top corner of the panel first, then place a level along the top and sides before securing the rest of the anchors.
Repeat the pre-drilling process for all remaining panels and secure tightly against the first panel to ensure level alignment when mounting.
Shop LipTB Wall Padding:
https://www.greatmats.com/wall-pads/safety-wall-pads-2x6ft-ltb-astm.php
Call Us 877-822-6622 or visit Greatmats.com for all your specialty flooring needs!
#wallpadding #wallpads #safetypadding #installation #install #paddedwalls