Home, Office, Cabin, Cottage

NOTE: This item is a custom order and is not returnable.

Porter Hill Engineered Hardwood Flooring 26 Sq Ft per Carton - Natural wood grain look

Porter Hill Engineered Hardwood Flooring 26 Sq Ft per Carton has a vintage finish for a reclaimed custom hardwood floor for your home or cabin.

Versus an actual hardwood flooring that uses maple throughout the entire thickness of the plank, our design makes use of a 2 mm thick veneer layer that fits over the top of a 1/2 inch plywood base.

By including plywood in the design, this product has a price of less than $6 per square foot of coverage. This is far less than what customers would expect to pay for an all-maple plank flooring.

Additionally, by only using a thin veneer layer of the beautiful maple hardwood, our product design preserves this precious material for other use cases.

The maple layer fits across the entire surface of the plywood base, which hides the plywood from sight upon installation. Any visitors to the home, restaurant, or office building will believe they’re looking at a real hardwood layout.

To enhance the appearance of a real hardwood floor, the manufacturer applied the hand scraped and wire brushed texture on the veneer layer in a random pattern.

When paired with the random natural wood grain pattern in the planks, this design is ideal for those wanting to approximate the look of real hardwood floors.

Additionally, the veneer layer has a beveled edge, which is exactly the look expected from real plank flooring. Knots and filled checks are part of the maple veneer too.

The designer provided a wide range of color variations within the stain on each plank. Thanks to the use of multiple applications of the stain, both dark and light browns are part of the look.

The 7-1/2 inch wide measurement of each of these planks enhances the different color variations on the planks, giving this floor an impressive design.

How to Install Engineered Hardwood Planks

The installation process is relatively easy to perform with these planks. Those installers with even just a little bit of experience with home improvement projects should be able to handle the work on their own without needing to hire a professional.

With the tongue and groove edging, installers will find these engineered wood planks almost as easy to install as a laminate plank.

Just start in one corner of the room. Work across the width of the room. Upon reaching the far wall, the installer will need to cut a plank to fit.

The carton of planks does contain sizes of varying lengths between roughly 1 and 7 feet. This allows the installer to waste less flooring when having to cut the last plank in the row to fit.

Installers can select among a few different means of installing the planks. Many installers will choose the floating floor design. Just slide the tongue and groove edges of one plank into an adjacent plank.

If placing a floating floor over concrete or a wood subflooring, the manufacturer recommends laying out a vapor retarding barrier first.

Installers also have the option of using urethane-based glue, brad nails, or staples to attach the planks to the subfloor. Always follow the specific instructions that ship with the planks when using one of these methods.

These planks provide a high level of resilience for customers. They carry a limited 35-year manufacturer’s residential finish warranty and a limited lifetime manufacturer’s structural warranty.

Premium Engineered Wood Plank Specifications

• Width: 7-1/2 inches
  
• Length: Random lengths between 11 and 83 inches
  
• Thickness: 1/2 inches
  
• Veneer layer: 2 mm (about 0.08 inches)
  
• Coverage per carton: 26 square feet
  
• Texture: Hand scraped and wire brushed

Maintenance and Care

To clean this natural plank flooring with a maple veneer layer, simply remove dust and other debris at least once per week or more often, as needed. Use a dust mop or a broom for the best results.

Homeowners also can use a vacuum cleaner, if that’s easier. However, only use a vacuum that has a felt or brush attachment. A vacuum with a beater bar could cause damage to the natural wood finish.

For occasional cleaning methods to remove grime, do not use harsh floor cleaning products. Instead, stick to a wood floor cleaner.

Excessive water could cause stains on the veneer layer. Avoid mopping the planks with water alone. Should any spills or pet accidents occur on the flooring, try to clean them up as quickly as possible to prevent staining.

Maintenance

Sweep or dust mop your floor once a week or more with an approved floor cleaner. Spills, pet accidents, or tracked in dirt should be cleaned immediately. Never clean or wet mop with water, water may damage floor. Use a wood floor cleaner, do not use harsh abrasive cleaners.

Shipping

Ships in cartons via ground service to your door, for larger orders product may ship freight delivery.

This Product Ships UPS Ground and/or Freight.
Please review our shipping disclaimer.

SKU#	JH-PORT-HILL
In Stock	Yes
Product Type	Tile
Material Type	Engineered Hardwood
Product Edging	Straight
Thickness	1/2 inch
Width	0.62 feet
Length	7.00 feet
SF per Item	26.00
Weight	41.00 lbs
Packaging	Cartons
Non Absorbent	Yes
Special Adhesives	No
Interlock Loss	0.00 feet
Interlocking Connections	No
Made In	Asia
Surface Finish	Wire brushed
Surface Design	Wood Grain
Installation Method	Staple, Cleat, Glue, Float
UV Treated	No
Reversible	No
Border Strips Included	No
Floor Score	No
Green Label	No
Manufacturer Warranty	Limited 35 year manufacturer's residential finish