Rubber Tile Interlocks with Borders 10% Color Custom CrossTrain 8mm x 25x25 In Pacific
Be the first to review this product
$13.94/tile
Save 20%
$3.21/sqft
Reg: $17.43/tile
Handling Time Estimate: 7-10 Working Days
- Variety of 10% color fleck options
- Each tile comes with 2 border strips for a finished edge
- Slip resistant surface provides traction
- See More Details
- Variety of 10% color fleck options
- Each tile comes with 2 border strips for a finished edge
- Slip resistant surface provides traction
- Interlocking edges for easy installation
- No adhesive is required for installation
- Easy to clean and maintain
- Order minimum is 300 sq ft
- Made in California with recycled rubber
Fitness clubs, High impact studio, Free weight or dumbbell areas, Gyms, Indoor, Commercial fitness center
NOTE: This item is a custom order and is not returnable.
8mm Interlocking Rubber Tiles
Rubber Tile Interlocks with Borders 10% Color Custom CrossTrain 8mm x 25x25 In Pacific is an excellent choice for home gyms and small areas when easy-to-install flooring is needed and you want a pop of color. Each rubber interlocking tile comes with two border strips to create finished edges for installations that are not wall-to-wall.
8 mm thick rubber tiles are an economical option for home gyms where thick, heavy-duty flooring isn't needed such as in a weightlifting area. This flooring is appropriate for home exercise rooms and home gyms with standard exercise equipment.
Each tile weighs only 8.25 pounds each making these easy to carry down to a basement gym or upstairs to another floor. Whereas rubber flooring rolls can be bulky, heavy, and require multiple people to carry, rubber tiles are easy for one person to install.
Advantages of Home Gym and Exercise Room Flooring
Rubber flooring is a very durable material compared to foam flooring for home gyms. Rubber tiles do not indent under the weight of exercise equipment.
Rubber provides some ergonomic relief versus hard flooring but is not soft. Interlocking rubber tiles provide traction while exercising to help prevent slips and falls.
The banging of hand weights and exercise machines can be excessive, but rubber floors put a damper on some of this noise.
This interlocking rubber gym tile is made in the USA with recycled rubber material which keeps tires out of the landfill.
10% CrossTrain Custom Colors
The 10% CrossTrain Custom Colors are available in a variety of color offerings to create an eye-catching look in your gym.
- Beige/White: Neutral beige with subtle white specks, offering a soft and versatile appearance.
- Blue/Chrome/Red: Patriotic-themed color option: A patriotic mix of blue, chrome, and red flecks, perfect for a bold, Americana-themed design.
- Blue/Green/Gold: A lively mix of blue, green, and gold flecks for a vibrant and energetic feel.
- Brick Red/Gold: Rich brick red with luxurious gold flecks, adding a touch of elegance and warmth.
- Brick Red/Purple/Teal: A unique combination of brick red with purple and teal flecks for a striking and artistic appearance.
- Brick Red/Yellow: Bold brick red interspersed with bright yellow flecks, offering a cheerful and dynamic look.
- Gray/Light Blue: Soft gray with light blue specks, offering a calm and soothing appearance.
- Purple/Yellow: A bold purple base with vibrant yellow flecks, creating a fun and energetic look.
Experience a Simple Installation of Interlocking Rubber Tiles with Borders
To install these rubber tiles, just line up the edges of the interlocking puzzle tiles and push them together. You can use a rubber mallet to quicken the process. Each tile has two border pieces that can be removed for the tiles in the center of the installation. Use the borders to create finished edges for island installations.
If you plan to install rubber tiles wall-to-wall and will need to cut the tiles to fit the room, consider purchasing rubber tiles without borders as this will reduce the excess material.
Test Data:
Density - ASTM E96 - 68.3lbs/cubic feet
Tensile Strength - ASTM D412 – 2665 psi
Tear Resistance - ASTM D413 - Average elongation at break 1.52
Hardness - D2240 - Shore A 65 +/- 5
Slip Resistance - D C1028 - Coefficient of Friction .084-.090
Abrasion - D4060 - 2,000 cycles taber abraser 1kg, 0.329g - 0.35g loss
Flammability - ASTM E648 - Critical Radiant Flux <0.10W/cm2
Chemicals – N/A - Resistant to most acids and chlorine
Volatile Organic Compounds - CDPH v1.2 - <.05mg/m3
Compliant with the performance standards established for low-emitting flooring under the Collaborative for High Performance Schools (CHPS) and the LEED Pilot Credit 21: Low-Emitting Interiors programs.
Please Note: Special Order Colors
The following colors are special order and have a lead time of a minimum of 10 to 12 days. Please call to order. Special order colors: Yellow, Purple, Gold, Beige, Brown, Charcoal, Chrome, Cream, Forest, Light Green, Orange, Spa, Teal
This product has a minimum of 300 square feet per order.
Maintenance
Clean with a damp mop and let dry. Always use a neutral pH cleaner on rubber flooring.
Shipping
Larger orders ship via freight delivery shrink wrapped on pallets. Smaller orders ship ground delivery.
This Product Ships UPS Ground, FedEx Ground and/or Freight.
Please review our shipping disclaimer.
| SKU# | Ecolock8mm-20Cust |
| In Stock | Yes |
| Product Type | Tile |
| Material Type | Rubber |
| Product Edging | Interlocking |
| Thickness | 8 mm |
| Width | 2.08 feet |
| Length | 2.08 feet |
| SF per Item | 4.34 |
| Weight | 8.25 lbs |
| Packaging | Cartons |
| Non Absorbent | Yes |
| Special Adhesives | No |
| Universal Interlock | No |
| Interlock Loss | 0.03 feet |
| Material Hardness | Shore A 65 |
| Interlocking Connections | Yes |
| Made In | USA |
| Surface Finish | Smooth flat |
| Surface Design | Color fleck |
| Installation Method | Dry lay, interlocking |
| UV Treated | No |
| Reversible | Yes |
| Border Strips Included | Yes |
| LEED Points | Yes |
| Manufacturer Warranty | 5 year limited |
View Installation InstructionsRELATED PRODUCTS
(2)
(18)